General Dynamics CG-1220, Operation And Maintenance Manual

Page: 76 / 134

Appendix C– DTR Remote M&C Protocol CG-6073 (Rev R, June, 2012)
15
BAND 4 (OPTIONAL-Depending on RF Range)
Path:
/ CONFIGS BANDS BAND-4
Type:
Sub Menu
Syntax:
BAND-4
Notes:
The conversion parameters of the Block Downconverter to support this BAND must
be defined here to provide conversion to L-Band frequency.
BDC GAIN (OPTIONAL-Depending on RF Range)
Path:
/ CONFIGS BANDS BAND-1 BDC-GAIN
Type:
Data Editor
Syntax:
BDC-GAIN [= n] | [D]
Range:
Real: 0.0 .. 31.0
Notes:
The GAIN in dB, of the BDC and attenuator pair that supports this band. The typical
range for this parameter is 2-4 dB when using BDCs and 10 dB pads as provided by
GDST. NOTE: This parameter is set in the factory and should not be changed under
normal circumstances.
BDC GAIN (OPTIONAL-Depending on RF Range)
Path:
/ CONFIGS BANDS BAND-2 BDC-GAIN
Type:
Data Editor
Syntax:
BDC-GAIN [= n] | [D]
Range:
Real: 0.0 .. 31.0
Notes:
The GAIN in dB, of the BDC and attenuator pair that supports this band. The typical
range for this parameter is 2-4 dB when using BDCs and 10 dB pads as provided by
GDST. NOTE: This parameter is set in the factory and should not be changed under
normal circumstances.