General Dynamics CG-1220, Operation And Maintenance Manual

Page: 104 / 134

Appendix C– DTR Remote M&C Protocol CG-6073 (Rev R, June, 2012)
43
SET TIME
Path:
/ CONFIGS MEMORY DATE&TIME SET-TIME
Type:
Data Editor
Syntax:
SET-TIME [= n] | [D]
Range:
Integer: 000000 to 235959 (Must be a valid time)
Notes:
Changing this changes the current time ( in 24 hour format). Under the menu tree
shell the format is HHMMSS and all fields must be set.
SHELL
Path:
/ CONFIGS COMM-PARAM PORT-1 SHELL or
/ CONFIGS COMM-PARAM PORT-2 SHELL
Type:
Data Editor
Syntax:
SHELL [= n] | [D]
Range:
Integer: 0 .. 4
0 Disabled
1 M&C Shell
2 Message Printer
3 Data Reader
4 72xx M&C Shell
Notes:
SHELL determines the communications protocol used on this serial port. M&C Shell
provides monitor and control protocol support including status polling and system
configuration capability. 72xx M&C Shell provides TRL Monitor and Control
protocol support for status polling and system configuration by a 72xx ACU with
version 2 firmware. An ACU remote port set to DTR and a DTR set to 72xx M&C
SHELL will NOT communicate. Message Printer is a diagnostic tool which may be
used to record system events, when connected to a terminal program or a serial
printer.
SHELL (v 1.19.06 or later)
Path:
/ CONFIGS COMM-PARAM PORT-3 SHELL
Type:
Data Editor
Syntax:
SHELL [= n] | [D]
Range:
Integer: 0 .. 1
0 Disabled
1 M&C Shell
Notes:
SHELL determines the communications protocol used on this serial port. M&C Shell
provides monitor and control protocol support including status polling and system
configuration capability. The PORT-3 shell was added in v1.19.06.