Geko 20010 ED-S/DEDA, Operating Instructions Manual

Page: 92 / 159

TROUBLESHOOTING
40
5 Motor maintenance
- Keep up with regular motor maintenance according to the „lubrication and main-
tenance table. “ Under extreme, severe or dusty operating conditions, you should
service the motor more often than specified in this table.
- Perform maintenance on the individual items each time a specified interval is
reached.
For example: After every 1000 hours of operation, service those items listed
under „every 500 hours of operations,“ „every 100 hours of operation,“ „every 50
hours of operation“ and „every 10 hours of operation [inspection prior to start].“
- Leave special work marked with an asterisk (*) for authorised workshops.
Interval Items
See
Section
Every 10 hours of operation
(inspection prior to start)
Visual inspection -
Check motor oil level 2.4.2
Check fuel level 2.4.3
Every 50 hours of operation
Drain water and sediment from the water separator.
5.1
First 50 hours of operation of a
new or rebuilt motor
Change the motor oil 5.5
Change the oil filter 5.6
Tighten nuts and bolts -
Every 100 hours of operation
Clean radiators
5.4
Every 500 hours of operation
or once a year (whichever
comes first)
Change the motor oil
5.5
Change the oil filter
5.6
Change the fuel pre-filter
5.8
Change the fuel filter 5.9
Check and adjust v-belt 5.10
Check and adjust valve clearance *
Check and adjust injection pressure *
Every 1000 hours of operation Tighten nuts and bolts *
Change the air filter 5.11
Change v-belt 5.10
If necessary
Vent the fuel system 5.2
Clean air filter element 5.11