Geely EC715 2009, Workshop Manual

Page: 1865 / 2181

Symptoms Suspected Parts Measures / Refer to
6. If the above circuits are normal but the
symptoms still occur, replace the BCM Refer to 11.10.8.1 BCM Replacement .
Set up the anti-theft system, the security
indicator does not blink
1. Alarm Indicator Circuit Refer to 11.10.7.5 Anti-theft Indicator
Inoperative .
2. If the anti-theft indicator light circuit is
normal, replace the BCM Refer to 11.10.8.1 BCM Replacement .
When the remote control has no power, in
the alarm mode with the ignition switch is
at ON position, the alarm sound can not be
canceled.
1. Ignition Switch Circuit Refer to 2.10.7.3 Check Ignition Switch .
2. CAN-Bus Circuit Refer to 11.17 Data Communication
System .
3. Replace the remote control battery. If
the remote control system is working
properly, replace the BCM Refer to 11.10.8.1 BCM Replacement .
Even if the door is open, the alarm system
can still be set.
1. Door Controlled Lamp Switch Circuit Refer to 11.4.7.10 Courtesy Lamp
Inoperative .
2. If the door controlled lamp switch circuit
is normal, but the symptoms still occur,
replace the BCM Refer to 11.10.8.1 BCM Replacement .
When the anti-theft alarm system is in
working condition, the vehicle anti-theft
horn is inoperative.
1. Horn Circuit Refer to 11.10.7.6 Anti-theft Horn
Inoperative .
2. If the horn circuit is normal, replace the
BCM Refer to 11.10.8.1 BCM Replacement .
When the anti-theft alarm system is in
working condition, the hazard warning
lamps do not blink.
1. Hazard Warning Lamps Circuit Operate the turn signal (hazard warning
lamps), if all the turning lights do not work,
check the turn signal circuit.
2. If all the turn signal lamps do not work,
replace the BCM If all turn signal lamps do not work, replace
the BCM. Refer to
11.10.8.1 BCM
Replacement .
Body Electric Remote Anti-theft System 11-381
EC718/EC718RV EC715/EC715RV 10/2009