Geely EC715 2009, Workshop Manual

Page: 1786 / 2181

11.8.2 Description and Operation
11.8.2.1 Description and Operation
System Components
– Sunroof Control Module
– Sunroof Switch
–
Sunroof Motor With Pressure Sensor and Limit Sensor
–
Sunroof
– Sunroof Visor
Manual Operation
Electric sunroof is operated by sunroof switch located in the
dome lamp area. When the sunroof switch is pressed to move
the sunroof to a certain location, it will send a message to the
sunroof control module. The module will control the motor
direction to perform the corresponding operation to move the
sunroof glass to the requested location. Hold the button
40-500ms, the sunroof glass will continue to move until the
button is released.
Fast Operation
Fast operating mode allows sunroof automatically open or
close without the need to hold the switch. this function is
activated when the switch signal is more than 500ms, and can
be achieved when sliding and tilting.
Over-Flap
– This function is only activated in the tilt mode
– When the sunroof glass is tilted to the fully closed position,
the control module controls the motor to stop at the Over-
Flap, and then move back to full closed position.
Soft Stop
–
When the sunroof glass is sliding to open, it will stop at a
default location before the fully open position. This default
location is used to reduce wind-induced vibration.
– When the glass stopped at this location, the user can
continue to manipulate through the sunroof switch to the
fully open position of sunroof.
Express Down Function
When the sunroof closing is hindered, it will return to 200 mm
(7.87 in) before the normal closed position. This feature is only
activated in the fast-sliding closing and tilt mode.
Sleep Mode
–
After the sunroof motor stops rotating 30 s and there is no
open or close operation, the sunroof will enter sleep mode
to reduce power consumption.
– When opening or closing operation is executed, sunroof will
automatically be awakened.
11-302 Sunroof Body Electric
EC718/EC718RV EC715/EC715RV 10/2009