Geely EC715 2009, Workshop Manual

Page: 606 / 2181

2.10.7 Diagnostic Information and Procedures
2.10.7.1 Diagnosis Description
Refer to 2.10.2.1 Description and Operation Get familiar with the system functions and operation before start system diagnostics, so
that it will help to determine the correct troubleshooting steps, more importantly, it will also help to determine whether the customer
described situation is normal.
For the ignition system DTC code. Refer to the "control system diagnostic information and the steps" in the " 2.2.7.1 Diagnostic
Description ."
2.10.7.2 Visual Inspection
– Check installed aftermarket equipment that may affect the ignition system performance.
– Check the easy to access system components to identify whether there is significant damage or potential faults.
2.10.7.3 Check Ignition Switch
Check the ignition switch terminals continuity according to the following diagram
Ignition Switch
Terminal Logic Table
FE02-9001b
1. Turn the ignition switch to "OFF" position.
2. Disconnect the ignition switch wiring harness connector IP23.
3. Remove the ignition switch assembly.
4. Test ignition switch terminals continuity
Location Related Terminal Standard
OFF All Terminals Infinity
2-524 Ignition System JL4G18-D Engine
EC718/EC718RV EC715/EC715RV 10/2009