© 2016 GE Multilin Inc. All rights reserved.
The MM300 Motor Management System Instruction Manual for revision 1.6x.
MM300 Motor Management System, EnerVista, EnerVista Launchpad, and EnerVista
MM300 Setup are registered trademarks of GE Multilin Inc.
Allen-Bradley, RSLinx DeviceNet-3, RSNetWorx for DeviceNet, EDS Wizard, Allen-Bradley
1770-KFD Driver, and 1747-SDN Scanner Module, are registered trademarks of Rockwell
Automation, Inc.
The following screens are captured from ProfiCaptain v1.0 - © 2005 Profibus Center,
Netherlands:
– Figure 2 - Profibus configuration menu
– Figure 3 - Profibus I/O data - 87 words in, 1 word out
– Figure 4 - Profibus configuration menu
– Figure 5 - Profibus I/O data - 3 words in, 1 word out
The following screens are captured from ProfiTrace v1.4 - © 2005 Profibus Center,
Netherlands:
– Figure 6 - Profibus - extended diagnostic data
– Figure 7 - Profibus - no extended diagnostic data
The following screen is captured from DeviceNet Master Simulator. HMS Industrial
Networks. Version 1.7.4. ©2001, Bihl+Wiedemann GmbH
– Figure 8 - DeviceNet polled I/O data
The contents of this manual are the property of GE Multilin Inc. This documentation is
furnished on license and may not be reproduced in whole or in part without the permission
of GE Multilin. The content of this manual is for informational use only and is subject to
change without notice.
Part number: 1601-9025-A9 (February 2016)
