System Start-Up
LOGIQ V2/LOGIQ V1
–
User Guide
1-49
Direction 5610736-100
Rev. 9
Power Up Sequence
The system is initialized. During this time:
•
The system boots up and the status is reflected on the
monitor.
•
Probes are initialized for immediate operation.
NOTE:
If no probe is connected, the system goes into freeze mode.
•
Peripheral devices are activated on power up.
After initialization is complete, the default B-Mode screen is
displayed on the monitor (if a probe is connected).
Summary of Contents for LOGIQ V2
