Measurement and Analysis
LOGIQ V2/LOGIQ V1
–
User Guide
2-59
Direction 5610736-100
Rev. 9
Slope (Velocity, Time Interval and Acceleration)
To measure two velocity values, the time interval (ms), and
acceleration (m/s
2
):
1. Press
Measure
key to enter into measure mode, if
necessary.
Adjust
Caliper Change
in the Primary Menu to
S/D Slope
.
An active caliper with a vertical and horizontal dotted line
displays.
2. To position the caliper at the start point, move the
Trackball
.
3. To fix the start point, press
Set
. The system fixes the first
caliper and displays a second active caliper.
4. To position the second caliper at the end point, move the
Trackball
.
5. To complete the measurement, press
Set
. The system
displays the two peak end point velocities, the time interval,
and the acceleration in the Results Window.
Time interval
To measure a horizontal time interval:
1. Press
Measure
key to enter into measure mode, if
necessary.
Adjust
Caliper Change
in the Primary Menu to
S/D Time
.
An active caliper with a vertical and horizontal dotted line
displays.
2. To position the active caliper at the start point, move the
Trackball
.
3. To fix the start point, press
Set
. The system fixes the first
caliper and displays a second active caliper.
4. To position the second caliper at the end point, move the
Trackball
.
5. To complete the measurement, press
Set
. The system
displays the time interval between the two calipers in the
Results Window.
Summary of Contents for LOGIQ V2
