Performing an Exam
2-56
LOGIQ V2/LOGIQ V1
–
User Guide
Direction 5610736-100
Rev. 9
Doppler Mode Measurements
Basic measurements below can be made in Doppler Mode.
• Velocity
•
TAMAX and TAMEAN (Manual or Auto Trace)
•
Two Velocities with the Time Interval and Acceleration
between them
• Time
Interval
• Volume
Flow
NOTE:
The following instructions assume that you do the following:
1. In the B-Mode part of the display, scan the anatomy you
want to measure.
2. Go to the Doppler Mode part of the display.
3. Press
Freeze
.
Velocity
To measure velocity:
1. Press
Measure
key to enter into measure mode, if
necessary.
Adjust
Caliper Change
in the Primary Menu to
Velocity
.
An active caliper with a vertical and horizontal dotted line
displays.
2. To position the caliper at the desired measurement point,
move the
Trackball
.
3. To complete the measurement, press
Set
. The system
displays the velocity measurement in the Results Window.
Summary of Contents for LOGIQ V2
