Measurement and Analysis
LOGIQ V2/LOGIQ V1
–
User Guide
2-49
Direction 5610736-100
Rev. 9
Distance measurement
To make a distance measurement:
1. Press
Measure
key to enter into measure mode, if
necessary.
2. To position the active caliper at the start point, move the
Trackball
.
3. To fix the start point, press
Set
.
The system fixes the first caliper and displays a second
active caliper.
4. To position the second active caliper at the end point, move
the
Trackball
.
A dotted line connects the measurement points, if preset
accordingly.
5. To complete the measurement, press
Set
.
The system displays the distance value in the Results
Window.
HINTS
•
Before
you complete a measurement:
•
To toggle between active calipers, adjust
Cursor
Select
.
•
To erase the second caliper and the current data
measured and start the measurement again, press
Clear
once.
•
After
you complete the measurement:
•
To rotate through and activate previously fixed calipers,
adjust
Cursor Select
.
•
To erase all data that has been measured to this point,
but not data entered onto worksheets, press
Clear
.
Summary of Contents for LOGIQ V2
