GE LOGIQ P6, Service Manual

Page: 242 / 478

GE H
EALTHCARE
D
IRECTION
5245279, R
EVISION
3 LOGIQ™ P6/P6 P
RO
S
ERVICE
M
ANUAL
8 - 22 Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
8-2-4-4 Assembly procedure (cont’d)
6.) Screw 3 screws (5327646, HSH M6 X 16 WHT) to install the arm neck pipe. Make sure place DVI
cable be on the right side, power cable on the left side. Refer to the figure below.
7.) Screw 2 screws (5177684, HSH M5X20 WHT) to assemble the LCD monitor with flexible arm Top
part. Refer to the figure below.
8.) Insert the two cables inside the Flexible arm and Screw 4 screws (2159625, PH M4X8 W/SP) to
assemble the Lower arm cable bracket.
Figure 8-41 Assembling the arm neck pipe
Figure 8-42 Screwing 2 screws
Figure 8-43 Screwing 4 screws