GE LOGIQ 7 Basic User Manual Download Page 706

Page: 706 / 984

ReportWriter

LOGIQ 7 Basic User Manual

Direction 2392206-100 Rev. 1

Retrieving an archived Report

1. Select

Retrieve

on the Touch Panel. A Retrieve menu

displays.

Figure 14-6. Retrieve Menu

2. Select the desired report and press

Set

NOTE:

The retrieve report cannot be edited.

Accessing Worksheet, OB Graph and Anatomical Survey Pages

If the Worksheet, OB Graph and/or Anatomical Survey pages
have been saved for the current patient, you can access these
pages from the Report page.

NOTE:

OB Graph and Anatomical Survey pages only apply to OB.

1. Select

either

Worksheet

Graph

Anatomical Page

the Touch Panel.

NOTE:

There is also Fixed Text set up as hyperlinks for these
pages. Cursor to the fixed text and press

Set

2. The system displays the appropriate page (Worksheet, OB

Graph or Anatomical Survey) with the corresponding Touch
Panel.

3. Select

Report

to return to the Report page.

Summary of Contents for LOGIQ 7
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LOGIQ 7

Reviews:

Related manuals for LOGIQ 7

Brands by name

Popular brands

GE LOGIQ 7, Basic User Manual

Search results

Summary of Contents for LOGIQ 7

Reviews:

Related manuals for LOGIQ 7

Brands by name

Popular brands