GE LOGIQ 7, Basic User Manual

Page: 618 / 984

Cardiology
10
-
102 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Continuous
Capture with
additional image
acquisition
If the buffer is filled up before all the image acquisitions are
done, additional loops can be stored in the clipboard before
doing image assignment to the views.
1. Perform the Continuous Capture. See ‘Activating
Continuous Capture’ for more information. (Steps 1 to 11).
2. In the Continuous Capture selection screen, press Select
Later .
The Continuous Capture screen displays.
3. Perform the additional acquisition.
4. In order to resume the stress echo exam and assign loops
for the views from the Continuous Capture buffer, press
Protocol . If not displayed, select the template Exercise 2x4
from the template list.
5. Click the continuous capture images on the Protocol
Template screen.
The Continuous Capture selection screen displays.
6. Assign the cine loops to the view. See ‘Activating
Continuous Capture’ for more information. (Step 12 a - f).
7. Press Delete to discard the loop or press Store all to keep
the entire loop.
The normal procedure is to discard the loop. The loop is
very big and requires a lot of disk space.
8. Perform Analysis and Scoring.