GE LOGIQ 7 Basic User Manual Download Page 633

Page: 633 / 984

Stress Echo

LOGIQ 7 Basic User Manual

117

Direction 2392206-100 Rev. 1

Adding a group

1. In the Protocol template preview field, select the cells to be

part of the group.

2. In the Pre-defined group field, press

New group

A dialogue box displays to ask the user to enter a name for
the new group.

3. Enter the group name.
4. Press

. The new group displays in the pre-defined group

field.

Updating an

existing group

1. In the Pre-defined group field, select the group to edit.

The selected cells are highlighted in the Protocol template
preview field.

NOTE:

A selected group is highlighted by a blue frame.

2. Either select a new cell(s) to add to the group or deselect an

existing cell(s) to remove from the group.

3. Press

Update group

The display in the Protocol template preview field is updated
accordingly.

Deleting a group

1. In the Pre-defined group field, select the group to delete.

NOTE:

The selected group is highlighted by a blue frame.

2. Press

Delete group

The group is removed from the list in the pre-defined group
field.

Summary of Contents for LOGIQ 7
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LOGIQ 7

Reviews:

Related manuals for LOGIQ 7

Brands by name

Popular brands

GE LOGIQ 7, Basic User Manual

Search results

Summary of Contents for LOGIQ 7

Reviews:

Related manuals for LOGIQ 7

Brands by name

Popular brands