Custom Display
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
14–10
Changing a Parameter Value
To change a parameter value:
Trackball the arrow cursor to the desired parameter.
Press Set to highlight the choice.
If the parameter lists several values, Trackball the
arrow cursor to the desired value and press Set.
If the parameter needs the value to change, use the
Ellipse rocker switch to increase or decrease the value.
When the desired value is selected or changed, Trackball the
arrow cursor to SAVE.
Press Set.
A prompt at the bottom of the screen asks:
“Overwrite Existing Data? ‘y’ or ‘n’”.
Press ‘y’ to save the new values for the preset displayed.
Press ‘n’ and the prompt “Input User Preset Number (1–8)”
appears. Enter the desired number.
NOTE: If no is selected to overwrite current data, the system is
asking to make a new user application preset. The eight
available spaces are displayed by selecting the preset top
menu.
.