Recording Images
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
13–21
Line Printer (USA ONLY)
Operations
Display the desired report page:
S
OB
S
GYN
S
OB Graph
S
Cardiology
S
Vascular
S
Anatomical Survey
While the report page is displayed, press Ctrl + R to start the
printing process. This Ctrl + R function is not available unless
the report page is displayed on the screen.
The message “Preparing for print now” is displayed. After two
seconds the message changes to “Newpt/Power Off will delete
print data”. This message is displayed until the print operation
is complete.
If more than one report page is to be printed, the desired report
page must be displayed and Ctrl + R pressed.
If printing was not completed due to some sort of error, the
failed report must be displayed and Ctrl + R pressed again.
Ensure all reports have printed prior to deleting report data by
pressing New Patient or power off.
Configurations
The line printer will be connected to a serial port on the system.
This can be accomplished at Port MIC, Port A or Port B on the
rear panel.
The appropriate parameter in Set Up/System Parameters
page 5 must be set to “Line Printer”.
Hints