Preset Program
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
14–77
To program a user table (cont’d)
Figure 14–16. User Table Programming
Use the Ellipse
rocker switch to select the desired table
number from UT01 to UT10.
Press Set to select the desired table.
Use the Trackball to place the arrow cursor on the desired
table dimension. The choices are Dist (mm) for distance in
millimeters, Circ (mm) for circumference in millimeters and Area
for area in square millimeters. Press Set when the cursor is
over the correct dimension.
Use the Trackball to move the arrow cursor to the title block.
Type in the desired table title (maximum 4 characters). Press
Return.
Type in the author’s name (maximum 8 characters). Press
Return.
