GE Logiq 500 User Manual Download Page 371

Page: 371 / 579

Custom Display

LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0

14–9



Command line 2

This line shows the exam category and application preset
name.

Command line 3

This line shows the menu page displayed (1/18 is page one of
eighteen).

PRIOR will display the previous menu page. NEXT will display
the following menu page. CONTENTS will show a summary of
all Custom Display pages.

Use the Trackball to place the arrow cursor on PRIOR or
NEXT.

Press Set to change menu pages.

Command line 4

This line lists 4 commands that affect the parameters in the
category displayed. They are:

SAVE

is used to save any preset parameter
change(s).

RESET

if parameters were changed after the SAVE
function was used, RESET will return those
parameters to the saved values.

DELETE

is used to erase the currently displayed user
preset. Factory presets cannot be erased.

EXIT

returns the system to the last scan mode.
Parameter changes will only be temporary if
they were not saved before exiting.

Summary of Contents for Logiq 500




































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Logiq 500

Reviews:

Related manuals for Logiq 500

Brands by name

Popular brands

GE Logiq 500, User Manual

Search results

Summary of Contents for Logiq 500

Reviews:

Related manuals for Logiq 500

Brands by name

Popular brands