Preset Program
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
14–79
To enter table values
The Table-Edit Menu shown in Figure 14–17 allows for adding
data, editing data or clearing (deleting) a User Table.
Figure 14–17. Table Edit Menu
For each data point, the weeks (2 digits), days (1 digit) and
deviation (2 digits) must be entered.
The menu choices at the bottom allow:
SAVE
Saves the table in its current form.
CLEAR
Clears or deletes the entire table (and title).
SETUP
Returns to the User Table Programming Setup
menu.
NEXT-PG
Goes to the next page to continue data entry.
EXIT
Exits the User Programmable Table function.
Trackball to one of the above choices and press Set. When
exit is selected without doing a “Save”, all additions or edits are
lost. The table reverts to its previous state.
NOTE: If a new table was added, the measurement can be
added to the summary report. Follow the instructions under
Report Format in the Set Up/Preset program.
.
