GE H48681XB Service Manual Download Page 61

Page: 61 / 366

3.4.5 Connecting the Network Color Laser Printer

Caution

Please observe that the complete Printer Assembly has to be located outside of the patient environment

(according to IEC 60601-1 / UL 60601-1).

Caution

The printer being used may not be a medical device. The (Bluetooth) Printer Set and the Power Supply is

also not a medical device. The equipment meets the requirements of the EN 60950 Standard.

Note

It does not matter, whether an Ethernet crossover cable or a patch cable (straight through cable) is used.

The Network Color Laser Printer HP451 automatically reconfigures signals to yield expected results.

Connection directly to the Voluson E-Series

Physical connection:
1.

Connect the Color Laser Printer.

Connect the network cable to the Ethernet LAN connector on the Voluson E-Series system. The

other end connect to the Ethernet connector of the Color Laser Printer.

Connect the power cable of the printer to an external, non-isolated power source.

Install the Color Laser Printer as described in

Section 3.6.4 on page 3-45

Figure 3-8 Connection Scheme - Color Laser Printer (directly via network cable)

Setup Instructions

Voluson E-Series Service Manual
KTD106657 Revision 2

3-17

Summary of Contents for H48681XB















































































































































































































































































































































































Search results

Summary of Contents for H48681XB

Reviews:

Related manuals for H48681XB

Brands by name

Popular brands

GE H48681XB, Service Manual

Search results

Summary of Contents for H48681XB

Reviews:

Related manuals for H48681XB

Brands by name

Popular brands