GE H48681XB, Service Manual

Page: 120 / 366

3.13.3 Map Network Drive
1. Press the Utilities key on the control console.
2. In the “Utilities” menu touch the System Setup button to invoke the setup desktop on the screen.
3. On the left side of the screen select Connectivity and then click the Drives tab.
Figure 3-73 System Setup - Connectivity - DRIVES page
4. Click the
Map Network Drive
button to open a dialog where the system can be connected to a shared
network drive of another server.
Figure 3-74 Map Network Drive
5. Enter the name of the shared network folder in the „Network Folder Name” field.
6. Supply a valid user name and a password for this folder.
Note
If you check the „Automatic Reconnect“ box, the system tries to establish the connection again when starting
up. Otherwise, the connection must be re-established manually after a shutdown or reboot.
7. Select the Connect button to establish the connection to the remote system. If successful, the
Disconnect
button becomes active.
Note
The Map Network Drive button is also accessible in the “Connect USB and Network Drives” dialog window
that appears when pressing the USB key on the alphanumeric keyboard.
Note If there is an error during the connection, a warning message appears inside the dialog. In this case, please
verify the data in the dialog.
Note
If there already is a connection to the remote server, the Connect button is grayed. To change the existing
connection, first click on Disconnect and then enter the new settings.
Warning
Please make sure that the server you are connecting to is trustworthy and reliable. For details, contact your
local system administrator.
If you backup archive data to this server, all the patients demographic data will be copied to this server!
Setup Instructions
3-76
Voluson E-Series Service Manual
KTD106657 Revision 2