GE H48681XB Service Manual Download Page 167

Page: 167 / 366

4.4.6.2 Load Image Archive

Press the Utilities key on the control console.

In the “Utilities” menu touch the

System Setup

button to invoke the setup desktop on the screen.

On the left side of the screen select

Backup

and then click the

Image Archive

tab.

Click the

Load

button.

Figure 4-35 Image Archive Load - choose destination

Choose the destination (1).

Click on the backup to be restored (2). Additional information is displayed in the table.

Select the

button (3). The following window will be displayed.

Figure 4-36 select image archive data to be restored

Select (check mark) the image archive data to be restored to the Voluson E-Series system (4).

Select the

button (5) and then select

Yes

to start, or

to cancel the restore procedure.

Functional Checks

Voluson E-Series Service Manual
KTD106657 Revision 2

4-41

Summary of Contents for H48681XB















































































































































































































































































































































































Search results

Summary of Contents for H48681XB

Reviews:

Related manuals for H48681XB

Brands by name

Popular brands

GE H48681XB, Service Manual

Search results

Summary of Contents for H48681XB

Reviews:

Related manuals for H48681XB

Brands by name

Popular brands