GE H48681XB Service Manual Download Page 349

Page: 349 / 366

Caution

Failure to follow the prescribed cleaning or disinfection procedures will void the probes warranty. Do not soak

or wipe the lens with any product not listed in the Voluson E-Series Basic User Manual and/or care card.

Doing so could result in irreparable damage to the probe.

Caution

Disinfect a defective probe before you return it. Be sure to tag the probe as being disinfected.

Caution

Follow the Care Card instructions supplied with each probe (inside the probe boxes) for disinfectants and

gels that are compatible with the surface material of the probes.

Note

For the latest list of compatible cleaning solutions and disinfectants refer to: http://www.gehealthcare.com/

usen/ultrasound/products/probe_care.html.

Please be aware of the sensitive

probe head. TAKE EXTREME

CARE!

NEVER place or store a probe on its

scan head!

When disinfecting a probe, ensure

that there is sufficient space between

the probe and the container bottom!

10.4.5.4 Disinfection by means of the RIC-Holder

Especially for Real-time 4D endocavity probes (RIC), it is necessary to take extreme care when transporting

the system with the probe attached, or during the disinfection process. Inadequate handling may lead to

dead elements, shocked head mechanics, etc.
The RIC-Holder (especially developed for RIC Real-time 4D endocavity probes) guarantees that the

sensitive probe head does not hit the bottom of the container during the disinfection procedure.

Note

Instructions are supplied with each RIC-Holder (KTZ225469).

10.5 Using a Phantom

The use of a Phantom is not required during Preventive Maintenance. Customer may use it as part of their

Quality Assurance Program tests.

Care and Maintenance

Voluson E-Series Service Manual
KTD106657 Revision 2

10-9

Summary of Contents for H48681XB















































































































































































































































































































































































Search results

Summary of Contents for H48681XB

Reviews:

Related manuals for H48681XB

Brands by name

Popular brands

GE H48681XB, Service Manual

Search results

Summary of Contents for H48681XB

Reviews:

Related manuals for H48681XB

Brands by name

Popular brands