GE H48681XB, Service Manual

Page: 217 / 366

5.15 Boot Screen Functions
5.15.1 Overview
Following LINUX supported functions are available as soon as the “Boot Screen” appears:
Figure 5-23 Boot screen
Voluson
GE-Service
Rollback
Memtest (Memory Check)
After 3 sec. without pressing any key, the system will boot-up in windows (= Voluson item). If you missed
selection, retry again with Ctrl + Alt + Del.
5.15.1.1 Voluson
The System will boot-up in windows. The Ultrasound Application is started. For details see
Section 3.5.1.1
"During a normal boot, you may observe" on page 3-41
.
5.15.1.2 GE-Service
This function MUST NOT be used by the customer!
5.15.1.3 Rollback
This function offers the possibility to simply restore the previously used system configuration (rollback), which
was stored on R:\ during “FMI from DVD”.
1.
Turn system OFF and then back ON.
2. As soon as the “Boot Screen” appears (see:
Figure 5-23 on page 5-45
), press the [PgDn] (Arrow
down) key on the keyboard until the Rollback item is highlighted, then press Enter.
3. When the following WARNING message appears, press the [<-] (Arrow left) button to highlight
OK
and
then press Enter.
Figure 5-24 Warning message
After performing the rollback, the system reboots. The Ultrasound Application is started and finally the 2D
screen is displayed on the monitor.
Components and Functions (Theory)
Voluson E-Series Service Manual
KTD106657 Revision 2
5-45