GE Medical Systems LOGIQ ?200, Service Manual, Page: 187 / 212

GE MEDICAL SYSTEMS
LOGIQ
α
200 SERVICE MANUAL
2138853
6–103 RENEWAL PARTS
REV 5
6–3 FUSE REPLACEMENT
6–3–1 Introduction
LOGIQ
α
200 has three replaceable fuses. The table below states the items of those fuses.
TABLE 6– 1
REPLACEABLE FUSES
LOCATION Ref. No. RATING REMARKS
HV Assy F1 1 A, SB 250 V (SB ; Slow Blow type)
HV Assy F2 500 mA, SB 250 V (SB ; Slow Blow type)
Monitor F1 2 A, SB 125 V (SB ; Slow Blow type)
6–3–2 Replacement Procedures
Concerning replacing each fuse of LOGIQ
α
200, refer to the following steps;
Note
This system contains no operator serviceable parts inside. Please refer servicing to qualified
personnel from GE. (See Address of Chapter 1.)
Parts Required
FRU PART NAME QTY PART # REMARKS
601 FUSE SET 1 2148236
Tools Required
Screwdriver
Hexagonal Wrench (Key Size: 3mm)