89
Code F07012287
USE AND MAINTENANCE
ENGLISH
1
Fig. 159
7.3.4 FILLING THE CLEAN WATER TANK
To fill the tank unscrew the cap (1) and insert a water tube
from the mains or well.
ATTENTION
It is strongly recommended to always have a full cir-
cuit washer tank when performing the last treatment
of the shift in order to leave all parts of the machine
clean. During washing and ejection of the liquids with
the fan unit on a suitable field, pay attention not to let
the pump run uselessly when the liquid has run out.
7.4 TEST WITH CLEAN WATER
It is recommended to carry out a first test treatment with
clean water without introducing chemicals, to ascertain
correct spraying operation.
• Fill the tank with as much clean water as required.
•
Start the tractor and move to the open field.
• Start the tractor's PTO.
ATTENTION
Use the machine with the PTO at 540 RPM at most.
• Position the PTO selector on 540 RPM.
• The machine is operational.
ATTENTION
Avoid abruptly releasing the slip clutch and at a high
engine RPM, as this operation might damage the ma-
chine. The engine RPM may be increased only when
the machine is already operating.