107
Code F07012287
USE AND MAINTENANCE
ENGLISH
GENERATORE D'ARIA CALDA
UGELLO OTTIMALE Ø 5÷6 mm
Leister Kombi "TRIAC"
- In caso di danneggiamento si consiglia di
procedere alla riparazione procurandosi un
generatore d'aria calda (reperibile presso qual-
siasi idraulico) e chiedendo alla Unigreen il
seguente Kit :
Bacchette di polietilene lineare (vari colori)
Blocchetti superficie piana (da cui ricavare
tasselli per la riparazione di fori di grandi di-
mensioni)
- Utilizzando un taglierino, allargare in for-
ma conica la zona da riparare per arrivare al
60 ÷ 70% dello spessore.
Le parti devono essere assolutamente pulite.
Nel caso in cui qualche liquido abbia spor-
cato la zona, se necessario, tagliare per tutto
lo spessore.
- Ammorbidire la bacchetta di polietilene uti-
lizzando il generatore d'aria calda.
Scaldando l'area immediatamente circostan-
te la rottura con il generatore, appoggiare la
bacchetta sulle parti da riparare e ruotarla fino
a fonderle insieme e rendenderle omogenee.
Prestare attenzione ad ottenere una buona fu-
sione fra la bacchetta ed il pezzo. La linea di
saldatura dovrà essere il meno visibile possi-
bile.
- Per rendere le superfici più omogenee ci si
può aiutare con un rullo metallico. Questo
favorisce anche l'eliminazione di eventuali
bolle d'aria.
Prima di eseguire la riparazione, si consiglia
di fare una prova su un campione di polieti-
lene che troverete nel kit.
ISTRUZIONI PER LA
RIPARAZIONE DI UNA
CISTERNA
IN POLIETILENE
BOLLA D'ARIA
AIR BUBBLE SECTION
FESSURA
CRACK
FORO SBAGLIATO
INCORRECT HOLE
HOW TO REPAIR A
POLYETHYLENE TANK
A
B
C
La Unigreen SpA produce un'alta percentuale di polverizzatori
con cisterna in polietilene rotazionale a media densità, di seguito
riportiamo alcune caratteristiche del materiale:
- altissima resistenza agli urti
- superfici interne lisce che ne garantiscono la facilità di pulizia
- spessore uniforme
- resistenza a tutti i prodotti in uso per agricoltura
- facile riparabilità
IL POLIETILENE ROTAZIONALE
ROTATIONAL MOULDED POLYETHYLENE
- In case you have a damaged polyethylene
tank and you want to repair it, you need the
following:
-a hot air generator (obtainable from
hardware stores)
-the Unigreen basic repair kit containing the
following:
-Sticks of polyethylene in various colours
- Flat blocks of polyethylene to make plugs
and stops for larger repairs.
- Widen the area to repair in the form of a
"V", using a cutter, to 60-70% of the depth
of the material.
The opening must be absolutely clean, if
necessary cut away some of the material all
around the damaged area if it has been
dirtied by chemical products.
- Heat a stick of polyethylene to soften it and
place it in the cut, heating both the stick and
the cut to assist the weld.
For best results rotate the stick during the
operation.
Be careful to ensure good fusion and keep
the weld smooth and flat to make the repair
as least noticeable as possible.
-To assist in smooting the repair a metal
roller can be used, this will also help in
eleminating any air bubbles.
Before undertaking any repairs it is advisable
to practice on a flat piece of material
included in the kit.
Unigreen SpA produces a high percentege of sprayers with tanks of
medium-density lInear polyethylene made by rotational moulding.
Here is a list of some of the characteristics of the material:
- high impact resistance
- smooth internal surface to guarantee easy cleaning
- uniform thickness
- resistance to the chemicals used in agriculture
- easy to repair
GENERATORE D'ARIA CALDA
UGELLO OTTIMALE Ø 5÷6 mm
Leister Kombi "TRIAC"
- In caso di danneggiamento si consiglia di
procedere alla riparazione procurandosi un
generatore d'aria calda (reperibile presso qual-
siasi idraulico) e chiedendo alla Unigreen il
seguente Kit :
Bacchette di polietilene lineare (vari colori)
Blocchetti superficie piana (da cui ricavare
tasselli per la riparazione di fori di grandi di-
mensioni)
- Utilizzando un taglierino, allargare in for-
ma conica la zona da riparare per arrivare al
60 ÷ 70% dello spessore.
Le parti devono essere assolutamente pulite.
Nel caso in cui qualche liquido abbia spor-
cato la zona, se necessario, tagliare per tutto
lo spessore.
- Ammorbidire la bacchetta di polietilene uti-
lizzando il generatore d'aria calda.
Scaldando l'area immediatamente circostan-
te la rottura con il generatore, appoggiare la
bacchetta sulle parti da riparare e ruotarla fino
a fonderle insieme e rendenderle omogenee.
Prestare attenzione ad ottenere una buona fu-
sione fra la bacchetta ed il pezzo. La linea di
saldatura dovrà essere il meno visibile possi-
bile.
- Per rendere le superfici più omogenee ci si
può aiutare con un rullo metallico. Questo
favorisce anche l'eliminazione di eventuali
bolle d'aria.
Prima di eseguire la riparazione, si consiglia
di fare una prova su un campione di polieti-
lene che troverete nel kit.
ISTRUZIONI PER LA
RIPARAZIONE DI UNA
CISTERNA
IN POLIETILENE
BOLLA D'ARIA
AIR BUBBLE SECTION
FESSURA
CRACK
FORO SBAGLIATO
INCORRECT HOLE
HOW TO REPAIR A
POLYETHYLENE TANK
A
B
C
La Unigreen SpA produce un'alta percentuale di polverizzatori
con cisterna in polietilene rotazionale a media densità, di seguito
riportiamo alcune caratteristiche del materiale:
- altissima resistenza agli urti
- superfici interne lisce che ne garantiscono la facilità di pulizia
- spessore uniforme
- resistenza a tutti i prodotti in uso per agricoltura
- facile riparabilità
IL POLIETILENE ROTAZIONALE
ROTATIONAL MOULDED POLYETHYLENE
- In case you have a damaged polyethylene
tank and you want to repair it, you need the
following:
-a hot air generator (obtainable from
hardware stores)
-the Unigreen basic repair kit containing the
following:
-Sticks of polyethylene in various colours
- Flat blocks of polyethylene to make plugs
and stops for larger repairs.
- Widen the area to repair in the form of a
"V", using a cutter, to 60-70% of the depth
of the material.
The opening must be absolutely clean, if
necessary cut away some of the material all
around the damaged area if it has been
dirtied by chemical products.
- Heat a stick of polyethylene to soften it and
place it in the cut, heating both the stick and
the cut to assist the weld.
For best results rotate the stick during the
operation.
Be careful to ensure good fusion and keep
the weld smooth and flat to make the repair
as least noticeable as possible.
-To assist in smooting the repair a metal
roller can be used, this will also help in
eleminating any air bubbles.
Before undertaking any repairs it is advisable
to practice on a flat piece of material
included in the kit.
Unigreen SpA produces a high percentege of sprayers with tanks of
medium-density lInear polyethylene made by rotational moulding.
Here is a list of some of the characteristics of the material:
- high impact resistance
- smooth internal surface to guarantee easy cleaning
- uniform thickness
- resistance to the chemicals used in agriculture
- easy to repair
Fig. 194
12.4.4 REPAIRS
For repair operations it is recommended to make use
of the normal support network of the manufacturer at
your Dealer or use a specialised shop authorised by the
manufacturer.
Before servicing the machine it must be accurately
cleaned from product residues potentially harmful for re-
pairers and/or the environment. Do not perform welding
or operate with naked flames if you are not certain about
components inflammability.
The polyethylene tank is very sturdy and does not easily
break. It may be repaired in the event of small holes or
cracking from impacts or sharp objects.
12.4.4.1 REPAIRING THE POLYETHYLENE
TANK
Maschio Gaspardo S.p.A produces a high percentage of
atomisers with medium-density rotationally moulded polyeth-
ylene tank. Below are some of the material's features:
• extremely high resistance to impacts
• smooth inner surfaces which ensure easy cleaning
• consistent thickness
• resistance to all products used in agriculture
• easy to repair
Instructions for repairing a polyethylene tank:
-In case of damage it is recommended to perform the repair
by using a hot air generator (which can be obtained from
any plumber) and obtain the following kit from Maschio
Gaspardo:
• Sticks of linear polyethylene (various colours).
• Flat surface blocks (from which to obtain plugs to repair
large holes).
-Use a cutter to widen in a conical shape the area to be
repaired and reach 60/70% of the thickness.
The parts must be perfectly clean.
In the event the area is soiled with some liquid, if necessary
cut through the whole thickness.
-Soften the polyethylene stick using the hot air generator.
Heat the area right next to the damage with the generator,
place the stick on the parts to be repaired and rotate it until
they melt together and are smooth.
Pay attention to achieving good melt between stick and
piece. The welding line must be the least noticeable pos-
sible.
A metal roller may be used to make surfaces smoother.
This also aids in removing any air bubbles.
Before performing the repair, we recommend testing on
a polyethylene sample you will find in the kit.