86
Code F07012287
USE AND MAINTENANCE
ENGLISH
NO
Fig. 150
OK
1
Fig. 151
7.2 ADJUSTING WATER SYSTEM WORKING
PRESSURE
See chapter 6.4.13 “CONTROL UNITS”.
7.3 TANK LOADING
ATTENTION
Operation to be performed on a level surface, with trac-
tor turned off and key removed from the dashboard.
The machines for crop protection treatments, in view of
people, animals and environment protection, must only be
filled indirectly from open bodies of water and only by free
fall from water mains.
The filling pipe (1) must never come in contact with the
liquid inside the tank and thus must always drop the water
above the upper edge of the filling opening and through
the filter fitted there, in order to prevent overflowing and
environmental pollution.
Different methods are available for filling the tank;
• From the hatch by means of pipe from the top and
water source by fall or pressure.
• From the quick coupler through suction by the pump.
•
From the suction filter.
• From the anti-pollution ejector.
ATTENTION
Never fill the tank beyond the nominal capacity (usu
-
ally 5% less than the actual capacity) to prevent the
addition of the chemical concentrate or any formation
of foam to be conducive to overflowing causing pos
-
sible ground pollution. While filling never leave the
machine unattended.
The tank is fitted with graduated band which shows for
reasons of transparency the exact quantity of liquid inside.
This detection is precise if the tank is flat. Total actual
capacity coincides with the last number above. All fill
-
ing systems provided by MASCHIO GASPARDO S.P.A.,
standard or on request, are antipollution and prevent
liquid from spilling inside the tank.