58
Code F07012287
USE AND MAINTENANCE
ENGLISH
1
Fig. 80
Fig. 81
2
H. Water suction pipe union from external source:
6.5.2 MAIN TANK
The main tank (1) of the machine is constructed in high
density rotationally moulded polyethylene. Its form has
been studied to ensure the greatest resistance and func-
tionality on the field.
Produced with a specifically designed mould to provide
proper sturdiness, functionality thanks to its rounded
shape and at the same time carefully designed appear-
ance.
Capacity is increased by over 5% of its nominal value to
aid the mixing operations.
See page 104-105 for more detailed information.
6.5.3 SPEED INDICATOR
The tank is equipped with two graduated bands, one in
front of the machine and one on the right side, which
show for reasons of transparency the exact quantity of
liquid inside.
There are two level indicators in these machines, to aid
correcting the load value if the tank is not on a flat terrain.
These machines are equipped with the “Wet” external lev-
el gauge(2): this traditional system detects the amount of
water in the main tank via the principle of communicating
vessels. From the cabin you can understand the amount
of residual water by looking at the coloured ball inside a
clear plastic tube. You are in reserve when the ball is in
the lower portion of the gauge. This detection is precise if
the tank is flat. Total actual capacity coincides with the last
number above. All filling systems provided by MASCHIO
GASPARDO S.P.A., standard or on request, are antipollu-
tion and prevent liquid from spilling inside the tank.
6.5.4 DEVIOKIT
The Deviokit system (if present) enables to wash the
pump and water circuit even with the tank partially full as
well as the main tank to be fully emptied.
For all operations, see chapter 10.0 (WASHING TANKS
AND SYSTEM).