104
Code F07012287
USE AND MAINTENANCE
ENGLISH
2
2
Fig. 189
Fig. 188
2
Fig. 187
12.3.3 GREASING
At the end of every season, via the specific nipples (2),
grease all the points near the greasing sticker (Pic. 188).
ATTENTION
Clean the nipples before applying the greasing pump.
Clean polluted grease leaks after lubrication.
ATTENTION
For correct stability of the lubricant in question, re-
place it every 3 years.
ATTENTION
The manufacturer disclaims any liability if the oil com-
panies change oil chemical composition but leave the
type of identification unchanged.
In the event the lubricants set out in the table should
not be available, use lubricants of other makes, com-
patible and with the same features.
Never mix different oils.
LUBRICANTS TABLE
HYDRAULIC TANK OIL
ENI MULTITECH JD/F 10W30
MULTIPLIER OIL
SAE 90
GREASE
BEARING EP 2
PUMP OIL
(see pump booklet)
Table 22