G900X/G950 Installation and Maintenance Manual – PICP & Warranty Registration
Page C-37
190-00719-00
Revision D
There should be no Yellow band between the Red and the White/Green bands (see Figure C-18).
Figure C-18. Airspeed Test
C.2.13.2 Static Port Vertical Speed (Rate of Climb) Test
1.
Command ADTS to change the altitude at the rates shown in the table below.
2.
Wait for ADTS to report that target rates have been achieved.
3.
Verify that the Rate of Climb reported by the Vertical Speed field on the PFD is within the
tolerances specified in Table C-13.
Table C-13. Rate Of Climb
Vertical Speed,
feet/minute
Allowed tolerance,
±feet/minute
2000 100
1000 50
500 45
200 45
0 45
-200 45
-500 45
-1000 50
-2000 100
C.2.13.3 OAT Probe Check
Check the outside air temperature (OAT) measurement shown on the PFD to ensure it reads ambient
temperature.
