G900X/G950 Installation and Maintenance Manual – Airframe Specific Installation Instructions (G900X Only)
Page B-59
190-00719-00
Revision D
Preparation of the components of the 011-01780-00 kit is similar between varying angles. At the aft
section of the assembly, there is a pivot point. The two 115-00909-00 angles are clecoed to the
115-00922-00 bracket at the pivot point. Next, the desired angle is located in the assembly by clecoing the
assembly at a second, forward point, at one of the four angle options provided (see Figure B-76).
CLECO PIVOT
HOLE BOTH
SIDES OF
BRACKET
CLECO PIVOT
HOLE BOTH
SIDES OF
BRACKET
CLECO PIVOT
HOLE BOTH
SIDES OF
BRACKET
CLECO PIVOT
HOLE BOTH
SIDES OF
BRACKET
CLECO AT SECOND POINT,
BOTH ANGLE BRACKETS,
AT DESIRED ANGLE
CLECO AT SECOND POINT,
BOTH ANGLE BRACKETS,
AT DESIRED ANGLE
CLECO AT SECOND POINT,
BOTH ANGLE BRACKETS,
AT DESIRED ANGLE
CLECO AT SECOND POINT,
BOTH ANGLE BRACKETS,
AT DESIRED ANGLE
6° UNIVERSAL MOUNT ASSEMBLY
4° UNIVERSAL MOUNT ASSEMBLY
2° UNIVERSAL MOUNT ASSEMBLY
0° UNIVERSAL MOUNT ASSEMBLY
Figure B-76. Preparation Of Universal Mounting Bracket Assembly For Angle Options
