G1000 NXi System Maintenance Manual
Page 276
King Air 300 Series
Revision 1
190-00716-N1
6. In the ITEM window highlight
Enhanced AFCS
Press
ENT
key on PFD1.
7. Press the
CLR ALL
softkey.
8. Scroll the curser to GIA1 or GIA 2 configuration box, whichever was replaced, and press
the
ENT
key to check the box.
9. Press
“Load”
softkey.
10. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green “PASS” in the Configuration and Software columns for each item loaded.
•
“Upload Complete………….”COMPLETE” in the summary box.
11. Acknowledge the prompt by pushing the
ENT
key.
Configuration Manager Update
1. With the system still in configuration mode, scroll to the Configuration Manager page on
PFD 1.
2. Press the
CNFM CFG
softkey.
3. Select ok when prompted to “Confirm configuration as expected configuration”.
4. Power cycle the system. Verify there are no red-Xs or system alerts.
5. If red-Xs or system alerts are present, troubleshoot as necessary using Section 5
6. If there are no red-Xs or system alerts, continue to Section 7.3.3.
GIA 63W Test
GPS Signal Acquisition
Figure 7-2, Aux – GPS Status Page (MFD)
Summary of Contents for G1000 NXi
Page 112: ......
