G1000 NXi System Maintenance Manual
Page 104
King Air 300 Series
Revision 1
190-00716-N1
Item
Description/Procedure
Manual
Section No.
Interval
GFC700 Periodic
Check
Verify proper operation of the GFC700 by
performing the following:
Pre-Flight Test
AFCS Switch Checks
Autopilot Clutch Overpower Check
Autopilot Operation Checks
Phase 2 and 4
TAWS Functional
Check
Periodic TAWS function check
Phase 4
GDU 1050A PFD
(Qty 2)
Removal & Replacement
On Condition
GDU 1550 MFD
GMA 1347D (Qty 2)
Removal & Replacement
On Condition
GMA 1347D Test
Phase 2 and 4
Landing Gear Aural Alert Check
Phase 2 and 4
SiriusXM Audio Suppression Check
Phase 2 and 4
GIA 63W IAU (Qty 2)
Removal & Replacement
On Condition
GEA 71 EAU (Qty 2)
GTX 335R, GTX
345R, GTX 33( ), or
GTX 3000
Transponder (Qty 2)
Removal & Replacement
On Condition
Special Inspection - Perform GTX 335R,
GTX 345R, GTX 33( ), or GTX 3000 test.
24 Calendar Months
GDC 7400 Air Data
Computer (Qty 2)
Removal & Replacement
On Condition
Special Inspection – Perform Air Data Test.
24 Calendar Months
RVSM checks
Special inspection – Perform RVSM Checks
24 Calendar Months
Perform RVSM checks when:
•
a static port is removed/installed
•
the RVSM critical region is repaired
or painted
On Condition
GSU 75B ADAHRS
(Qty 2)
Removal & Replacement
On Condition
Magnetic variation database update.
On Condition
Special Inspection – Perform Air Data Test.
24 Calendar Months
Remove nose compartment pitot/static line
caps at T-fittings located forward of GSU
75B units and check for moisture. Refer to
Garmin drawing 005-00629-44 for line cap
part numbers if replacements are needed
and for torque information.
N/A
24 Calendar Months
Summary of Contents for G1000 NXi
Page 112: ......
