G1000 NXi System Maintenance Manual
Page 263
King Air 300 Series
Revision 1
190-00716-N1
Legacy Replacement Procedure GMA 1 or GMA 2 (Alternate Method)
To load the GMA complete the following subsections in order as they apply to the aircraft.
01) Baseline (For GMA 1 or GMA 2 replacement)
1. Insert the software loader card in the top slot of PFD1.
2. Power on PFD2, MFD, and PFD1 in configuration mode.
3. Select
NO
when “Do you want to update system files” is displayed on the screen of
PFD1.
4. Select the “
SYSTEM UPLOAD
” page using the small FMS knob on PFD1.
5. Activate cursor and rotate the small FMS knob to display the drop down menu. Rotate
the small FMS knob to highlight “
01)
Baseline”
and press
ENT
key on PFD1.
6. Rotate the small FMS knob to display the drop down menu. Rotate the large FMS knob
to highlight
King Air 200-300-Series Baseline Load
Press
ENT
key on PFD1.
7. Press the
CLR ALL
softkey.
8. Use the large FMS knob to scroll to GMA1 or GMA2 whichever was replaced.
9. Highlight the software box and press the
ENT
key.
10. Highlight the Configuration box and press the
ENT
key.
11. Press “
Load
” softkey.
12. Monitor load progress. Verify software load completes without errors as indicated by the
following:
13. Green “PASS” in the Configuration and Software columns for each item loaded.
14. “Upload Complete………….”COMPLETE” in the summary box.
15. Acknowledge the prompt by pushing the
ENT
key.
07) Connext - SXM (For GMA 1 or GMA 2 replacement and aircraft
equipped with a GDL 59 and/or GSR 56 only)
1. Scroll the curser to the Group window and select “
07) Connext - SXM
2. Press the
ENT
key.
3. In the ITEM window highlight the installed GDL 59 and/or GSR 56 configuration and
press the
ENT
key on PFD1.
4. Press the
CLR ALL
softkey.
5. Scroll the curser to GMA1 or GMA 2 configuration box, whichever was replaced, and
press the
ENT
key to check the box.
6. Press
“Load”
softkey.
7. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green “PASS” in the Configuration and Software columns for each item loaded.
•
“Upload Complete………….”COMPLETE” in the summary box.
8. Acknowledge the prompt by pushing the
ENT
key.
Summary of Contents for G1000 NXi
Page 112: ......
