G1000 NXi System Maintenance Manual
Page 89
King Air 300 Series
Revision 1
190-00716-N1
Go to the MFD Aux - Databases page and verify the uploaded databases transferred
from the Standby column to the Active column. If any did not transfer, follow these steps
to initiate a manual transfer -
a. Push the FMS knob on the GCU controller to turn on the curser.
b. Turn the FMS knob to highlight the database to transfer to the Active column.
c. Press the
ENT
key on the GCU and a cyan double arrow will appear between the
Standby and Active columns.
d. Restart the displays.
e. Go to the MFD Aux - Databases page and confirm the databases transferred.
Configuration of Navigation Map for Traffic System
1. With the MFD in normal mode, use the GCU FMS knob to select the Navigation Map
page then press GCU MENU key to display the PAGE MENU.
2. Turn the small right knob to select or verify selected ‘Map Setup’ and press the
ENT
key
and verify
TRAFFIC
is selected ON.
3. Verify the flashing cursor highlights the GROUP field.
4. Turn the GCU small FMS knob to select Traffic and press
ENT
on GCU.
5. If not already selected, use the GCU FMS knob to make the following selections:
•
Traffic – On
•
Traffic Mode – All Traffic
•
Traffic Symbols – 150NM
•
Traffic Labels – On 150NM
6. Return to the Map Page by pressing the GCU FMS knob or momentarily pressing and
holding the
CLR
key. Deactivate cursor.
Enter Flight ID for GTX 3000 Installations
1. On PFD1, press the TMR/REF softkey.
2. Use the large FMS knob and scroll to the bottom of the window and highlight the
FLIGHT ID field.
3. Use the FMS knobs to enter the aircraft registration and press the ENT key to save.
Summary of Contents for G1000 NXi
Page 112: ......
