G1000 NXi System Maintenance Manual
Page 318
King Air 300 Series
Revision 1
190-00716-N1
6. Rotate the small FMS knob to display the drop down menu. Rotate the large FMS knob
to highlight the installed GDL69. Press
ENT
key on PFD1.
7. Press the
CLR ALL
softkey.
8. Press the
Load
softkey.
9. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green “PASS” in the Configuration and Software columns for each item loaded.
•
“Upload Complete………….COMPLETE” in the summary box.
NOTE
If the software load fails, cycle power to the GDL 69A only and confirm
that the software part number and version are updated in the DATA
window on the MFD. Then, press ENT button on the PFD to check the
GDL 69A SXM SOFTWARE and CONFIGURATION check boxes and
press LOAD softkey again to resume the software update.
10. Press
ENT
key on PFD1 to acknowledge upload complete.
11. Deactivate cursor.
12. Scroll to the Configuration Manager page.
13. Press the
CNFM CFG
softkey.
14. Select ok when prompted to “Confirm configuration as expected configuration”
15. Power cycle the system. Verify there are no red-Xs or system alerts.
16. If red-Xs or system alerts are present, troubleshoot as necessary using Section 5.
17. If there are no red-Xs or system alerts, continue to Section 7.11.3.
GDL 69A Test
If a SiriusXM Satellite Radio subscription has already been activated for the GDL 69A/69A
SXM, then power up the G1000 and go to the
Aux – Information
page and verify that the GDL
69A/69A SXM is working properly. Refer to the Cockpit Reference Guide, listed in Table 1-2,
for details on Sirius XM Radio weather and music operation.
If the GDL 69A/69A SXM is replaced (new unit), the owner must re-activate the subscription,
using the new GDL 69A/69A SXM’s Radio ID number(s). Refer to the GDL 69A/69A SXM
Satellite Radio Activation Instructions, listed in Table 1-2, for details on the activation process.
As a final operations check, make sure there are no MANIFEST errors shown on the PFD for
the GDL 69A/69A SXM.
If no other service is to be performed, continue to the return-to-service checks in Section 9.
Summary of Contents for G1000 NXi
Page 112: ......
