Garmin Diamond DA40, Maintenance Manual

Page: 73 / 156

G1000/DA40 System Maintenance Manual Page 5-11
190-00303-03 Revision 6
5.5.5 Miscellaneous Alerts
Failure Message Cause Solution
XTALK ERROR – A flight display
cross talk error has occurred.
A communication error has
occurred between the MFD and
PFD.
Check the System Configuration page:
9 Ensure that MFD1 and PFD1
are green.
9 If configuration is not correct,
reconfigure the PFD and MFD
per instructions in Section
7.1.2.
Check Ethernet interconnect.
Replace PFD with a known good unit to
verify location of problem:
9
If problem persists, replace
MFD.
9
If problem does not persist,
replace PFD.
DATA LOST – Pilot stored data
lost. Recheck settings.
Pilot stored data has been lost.
Cycle power to PFD:
9 If problem persists, replace
PFD.
MFD1 SERVICE – needs service.
Return unit for repair. The system has determined
MFD1 needs service.
Replace MFD.
PFD1 SERVICE – needs service.
Return unit for repair. The system has determined the
PFD needs service.
Replace the PFD.