Garmin Diamond DA40, Maintenance Manual

Page: 113 / 156

G1000/DA 40 System Maintenance Manual Page 7-19
190-00303-03 Revision 6
12. Select the GTX page group, then select the Transponder Configuration page on the PFD:
13. Ensure that the ‘ADDRESS TYPE’ is ‘US TAIL’ under the ‘SET’ and ‘ACTIVE’ columns.
14. Activate the cursor and highlight the ‘ADDRESS’ field. Use the small/large FMS knobs to enter
the aircraft registration number.
15. Once the correct registration number is entered, press the ENTER key. The transponder is
configured:
16. The transponder then alerts the technician of complete configuration:
17. Press the ENTER key on the PFD and deactivate the cursor
18. Continue to the GTX 33 Test procedure.