Garmin Diamond DA40, Maintenance Manual

Page: 105 / 156

G1000/DA 40 System Maintenance Manual Page 7-11
190-00303-03 Revision 6
11. Go to the System Status page.
12. Activate the cursor and highlight each of the following items in the LRU window:
-GIA1
-GIA2
-GPS1
-GPS2
13. Check the reported part number/version of each software file and compare to the data in
Appendix A.
14. Continue to the GIA 63 Test procedure.
7.3.3 GIA 63 Test
GPS Signal Acquisition:
Figure 7-4. GPS Signal Status
The GIA 63 units should normally acquire a 3D GPS navigation solution within 5 to 10 minutes of
startup, provided the aircraft is outside (or indoors with a GPS repeater). Select the satellite status page
on the MFD (3
rd
page in AUX group). Two softkeys on the bottom of the display allow the user to toggle
between GPS 1 and GPS 2. Verify that both receivers show 3D Navigation on the MFD.
Continue to the VHF COM Interference test.