Garmin Diamond DA40, Maintenance Manual

Page: 156 / 156

G1000/DA40 System Maintenance Manual
Revision 6 190-00303-03
Page B-16
B.9 Aviation Database Loading
1. Remove power from the system.
2. Insert an aviation database update SD card into the top slot of the PFD.
3. Turn the G1000 system on. The following prompt is displayed in the upper left corner of the
PFD:
4. Press the ENT key to confirm the database update. The following prompt is displayed:
5. After the update completes, the PFD starts in normal mode. Remove the aviation database update
SD Card from the PFD.
6. Power the G1000 system down.
7. Repeat steps 1 through 4 for the MFD. The MFD and PFD aviation databases are now updated.
8. Confirm that the correct update cycle and version is loaded during startup of the MFD.
9. Remove the aviation database update SD Card from the MFD.
B.10 Final System Testing
After completion of system software loading, perform the tests for each LRU as specified in Section 7, as
applicable.
After completing all LRU tests, perform the final system checkout as specified in Section 8.
Be sure to record the maintenance performed in the appropriate aircraft maintenance documentation.