Page 7-4
G1000/DA40 System Maintenance Manual
Revision 6
190-00303-03
7.1.4 PFD/MFD
Test
1.
Allow displays to initialize for ~1 minute.
2.
Check that all COM/NAV display fields are valid in the top corners of the display.
For PFD
: Check that attitude, heading, altitude, airspeed, vertical speed and OAT fields are valid
within 2 minutes of power up.
For MFD:
Check that the engine instrument fields are valid.
Figure 7-1. G1000 Normal Mode Check
3.
Push the red display reversion button on the GMA 1347. Verify both displays enter reversionary
mode (both should have valid attitude, heading, altitude, airspeed, vertical speed, and engine
instruments):
Figure 7-2. G1000 Reversionary Mode Check
4.
De-activate reversion mode by pushing the red reversion button again.
5.
If no other service is to be performed, perform final return-to-service test as specified in
Section 8.
Summary of Contents for Diamond DA40
Page 1: ...190 00303 03 January 2007 Revision 6 G1000 System Maintenance Manual Diamond DA 40...
Page 130: ......
Page 137: ...G1000 DA40 System Maintenance Manual Page A 3 190 00303 03 Revision 6 A 4 Parts List...
Page 138: ...G1000 DA40 System Maintenance Manual Revision 6 190 00303 03 Page A 4...
