G1000/DA 40 System Maintenance Manual
Page 7-17
190-00303-03
Revision 6
7.5
GTX 33 Transponder
Original GTX 33 is Reinstalled
No software or configuration loading is required if the removed GTX 33 is re-installed. Continue to the
GTX 33 Test procedure.
New GTX 33 is Installed
If a new GTX 33 (new serial number) is installed, the correct software and configuration files must be
loaded to the unit. Continue to the GTX 33 Software Loading procedure.
7.5.1 GTX 33 Software Loading
1.
Insert the correct G1000/DA 40 SW Loader Card (see Appendix A) into top slot of PFD.
2.
Start the G1000 system in Configuration mode.
3.
Go to the Software Upload page using the FMS knob.
4.
Highlight the GTX software file. Ensure that both paths to the GTX 33 through GIA1 and GIA 2
appear in the LRU field as shown:
5.
Press the LRU softkey. Select the GTX1 - GIA1 data path to load software. Press the LOAD
softkey.
6.
Select YES and press the ENT key to acknowledge the following prompt:
7.
The software for the GTX 33 transponder begins to load. Monitor the upload status as it
progresses:
8.
After the files finish loading, press ENT to acknowledge the following prompt:
9.
Check the SUMMARY field to ensure the load is ‘COMPLETE’.
10.
Continue to the GTX 33 Configuration procedure.
Summary of Contents for Diamond DA40
Page 1: ...190 00303 03 January 2007 Revision 6 G1000 System Maintenance Manual Diamond DA 40...
Page 130: ......
Page 137: ...G1000 DA40 System Maintenance Manual Page A 3 190 00303 03 Revision 6 A 4 Parts List...
Page 138: ...G1000 DA40 System Maintenance Manual Revision 6 190 00303 03 Page A 4...
