Furuno FV-110, Operator'S Manual

Page: 81 / 240

Configuration with the web interface
5-19
2. Clear the box labeled Use a proxy server for your LAN .
3. Click OK .
When the proxy server settings are disabled, close and restart your browser.
You may need to change this setting back on return to your Internet connection.
To connect a PC
To connect your PC to the ACU do as follows:
1. Connect a PC to LAN interface 3 (Service port, standard Ethernet) of the ACU or to
the front LAN connector of the ACU.
If you want to use another LAN port than LAN 3 you must configure it according to
your network requirements. For information how to configure the LAN connectors see
To configure the LAN network on page 5-29.
2. Open your Internet browser and enter the IP address of the ACU. The default IP
address is http://192.168.0.1 .
Status field in the top bar
The top bar shows the current status of the antenna. Examples are:
• Not ready (waiting for input from GNSS, e.g. GPS)
• Antenna initializing
• Antenna SW upload
• Antenna POST error
• XIM data error
• Unrecoverable XIM data error
• System upgrade
• Antenna POST pending
• Antenna POST