List of ADU events
G-5
0A041-0
Antenna
WARNING
BUC voltage low
The voltage for the BUC is too low, probably
caused by a malfunctioning VIM or BUC.
0A042-0
Antenna
WARNING
BUC voltage high
The voltage for the BUC is too high probably
caused by a malfunctioning VIM.
0A043-0
Antenna
WARNING
LNB voltage low
The voltage for the LNB is too low probably
caused by a malfunctioning VIM/TIM or LNB.
0A044-0
Antenna
WARNING
LNB voltage high
The voltage for the LNB is too high probably
caused by a malfunctioning VIM/TIM.
0A045-0
Antenna
WARNING
PMM fan
The fan is not working or the tacho input from the
fan is not connected. Check fan cable and fan.
0A046-0
Antenna
WARNING
Antenna
temperature
The temperature of the BUC is too high. Check if
the fan is working.
0A047-0
Antenna ERROR
VIM PLL lock
The PLL of the VIM/TIM is out of lock. Check
the 10 MHz reference signal.
0A048-0
Antenna
WARNING
VIM tuner lock
The PLL of the second receiver (DVB) is out of
lock. Check the 10 MHz reference signal.
0A049-0
Antenna
WARNING
Azi encoder slip
A slip of the azimuth encoder has been detected.
If this event is not resolved by itself after some
time, check the belt and encoder of the azimuth
axis.
0A04A-0
Antenna
WARNING
Xel encoder slip
A slip of the cross-elevation encoder has been
detected. If this event is not resolved by itself
after some time, check the belt and encoder of the
cross-elevation axis.
0A04B-0
Antenna
WARNING
Ele encoder slip
A slip of the elevation encoder has been detected.
If this event is not resolved by itself after some
time, check the belt and encoder of the elevation
axis.
0A04C-0
Antenna
WARNING
Pol encoder slip
A slip of the polarisation encoder has been
detected. If this event is not resolved by itself
after some time, check the belt and encoder of the
polarisation axis.
0A04D-0
Antenna
WARNING
GNSS position
No position available from the GNSS device or
position too old.
0A04E-0
Antenna
WARNING
GNSS velocity
No velocity available from the GNSS device.
Error code
(ID)
Unit
Severity
Description
Explanation
Table G-1: ADU event messages (Continued)
Summary of Contents for FV-110
