Furuno FV-110, Operator'S Manual

Page: 126 / 240

Software update
7-4
7.2 Software update
7.2.1 Hardware and software requirements
The following items are required before the software can be updated:
• One computer with a standard Ethernet port available.
• A standard Internet browser.
• 1024×768 pixels or higher display resolution. The program is best viewed using small
fonts.
• One straight LAN cable.
• The file containing the new software.
7.2.2 Software update (ADU and ACU)
Software update using the web interface of the ACU
1. Power up the FV-110 system, i.e. switch on the ACU. Wait until the message
“Initializing” has disappeared from the ACU display.
2. Connect a PC to LAN interface 3 (Service port, standard Ethernet) or the front LAN
connector of the ACU.
Figure 7-3: LAN connector used for software update (web interface)
3. Open your Internet browser and enter the IP address of the ACU. The IP address is
http://192.168.0.1 (default). For further details on network setup see To configure the
LAN network on page 5-29.
4. If needed, type in the user name admin and the password 1234 .
5. The web interface opens directly with the DASHBOARD page.
6. Click SERVICE from the left navigation pane. The Upload page is displayed.
Note
Only qualified service personnel should make a software update.