Furuno FV-110, Operator'S Manual

Page: 168 / 240

Gilat SkyEdge II VSAT modem
C-26
C.7 Gilat SkyEdge II VSAT modem
C.7.1 Interfaces and VSAT modem configuration
The following sections describe how to connect an ACU to a Gilat SkyEdgeII VSAT
modem. The Gilat SkyEdge II and the FV-110 are fully integrated and require only little
user setup.
Connections
Connect the ACU and Gilat SkyEdge II with the following cables:
• 75 Ohm RF cables F-F connectors for RX and TX frequencies
• Serial cable for communication with the modem. Connect SERIAL on the VSAT
modem to RS-232 on the ACU. You can use the cable described in Modem Cable
iNFINITI iDirect VSAT modem on page B-3.
Figure C-20: Connecting Gilat SkyEdge II VSAT modem to the ACU
Figure C-21: Connecting Gilat SkyEdge II VSAT modem (rack) to the ACU
Modem configuration requirements
1. Connect a PC with an Ethernet cable to LAN port 1 of the VSAT modem.
2. Set the PC to static IP address: 192.168.1.2
3. Start an Internet browser (e.g. Internet Explorer) and go to URL://192.168.1.1 in order
to get access to the web server of the VSAT modem.
4. Login with: User name: inst and Password: $Sat2598$
5. Go to the menu Installer .