Furuno FV-110, Operator'S Manual, Page: 184 / 240

Supported commands
D-6
satellite skew
satellite skew 3.7
Shows or sets an additional skew offset of the
satellite. Some satellite has additional skew
because they have been placed different in the
orbit. E.g. Optus satellites in Australia are offset -
45 degrees. Most satellites have 0 degree skew
offset.
• Skew of the satellite: –90° to +90°.
satellite max_inc
satellite max_inc 2.5
Shows or sets the maximum inclination of the
used satellite. Some satellites are old and are
therefore moving in larger circles in space.
Setting the maximum inclination will add this to
the FV-110 acquisition window size used to find
the satellite.
• Maximum inclination of satellite 0.0° to 90°
satellite rx_pol
satellite rx_pol v
Shows or sets the current RX polarisation:
• v (vertical)
• h (horizontal)
• l (left)
• r (right)
satellite tx_pol
satellite tx_pol v
Shows or sets the current RX polarisation:
• v (vertical)
• h (horizontal)
• l (left)
• r (right)
satellite ele_cut_off
satellite ele_cut_off 5
Shows or sets the elevation referenced to earth
where the FV-110 must shut off for transmission.
This is an FCC requirement. The elevation cut off
depends on how much power is transmitted and
which coding is used.
• Valid range: 0° to 90°
satellite rx_lo
Shows the Rx LO / LNB LO. Range: 9.6 GHz to
11.3 GHz. GX: 18.25 GHz.
Command Description
Table D-8: UCLI command:
satellite (Continued)