Furuno FV-110, Operator'S Manual, Page: 120 / 240

Installation check list: ACU, connectors and wiring
6-4
8.
Check connection of the VSAT modem:
COMTECH only!: Check that the ACU
RS-232 port is connected to the Remote
Control port and Alarm port of the VMU
using the serial cable (specifications in
Modem Cable COMTECH Serial & RSSI
TT7016A
on page B-2).
iDirect iNFINITI Series/ Evolution
only!:
Check that the ACU RS-232 port is
connected to the Console port of the VMU
using the included serial cable.
iDirect iNFINITY Series only!: Check
that the ACU LAN port 1 is connected to
the LAN B of the VMU using the included
CAT5 Ethernet cable.
iDirect Evolution only!: Check that the
ACU LAN port 1 is connected to the LAN
of the VMU using the included CAT5
Ethernet cable.
STM SatLink 2900 : Check that the ACU
LAN port 1 is connected to the LAN of the
VMU using the included CAT5 Ethernet
cable.
Gilat SkyEdge II VSAT modem: Check
that the ACU RS-232 port is connected to
the SERIAL port of the VMU using the
included serial cable.
Visual inspection of the
connector panel of the
ACU and the VSAT
modem. See also:
COMTECH 570L and
ROSS box
on page C-17
OpenAMIP setup for
iDirect iNFINITI &
Evolution
on page C-3
OpenAMIP setup for
iDirect iNFINITI &
Evolution
on page C-3
STM SatLink 2900 VSAT
modem
on page C-22
Gilat SkyEdge II VSAT
modem
on page C-26
9.
Check that the ACU's NMEA 0183
connector is connected to the NMEA 0183
bus of the vessel using the included multi-
connector Visual inspection of the
connector panel of the
ACU connector.
Step Task
Verification and further
information
Done
Table 6-2: Installation check list: ACU, connectors and wiring (Continued)